Error in ADI preventing upload to QRZ

[N0LUV]

I made a couple contacts after getting my radio setup last night and for the first time, I was using the General template. Typically I use the POTA template on my phone, but last night, I installed the MAC OS version and used the general template. Upon the few QSOs I made, I went to upload my ADI, but it got rejected by QRZ. I am not sure if this is an issue with QRZ or an issue with the template, but maybe someone can look below and see if anything is missing.

Here is the text of the ADI:

> Generated on 2024-08-18T02:33:31.472Z 
> <adif_ver:5>3.0.5
> <programid:5>HAMRS
> <programversion:5>1.0.7
> <EOH>
> 
> <band:3>20m
> <call:4>HI3K
> <country:18>Dominican Republic
> <freq:6>14.243
> <gridsquare:6>FK49pk
> <mode:3>SSB
> <my_gridsquare:6>EL29fr
> <name:17>CONSTANTINO CARLO
> <operator:5>NOLUV
> <qso_date:8>20240818
> <qso_date_off:8>20240818
> <qth:8>SANTIAGO
> <rst_rcvd:2>59
> <rst_sent:2>59
> <time_on:6>020648
> <tx_pwr:2>80
> <eor>
> 
> <band:3>20m
> <call:6>KE0ITC
> <cnty:8>Plymouth
> <country:13>United States
> <freq:6>14.296
> <gridsquare:6>EN12vs
> <mode:3>SSB
> <my_gridsquare:6>EL29fr
> <name:17>Scott H Timperley
> <operator:5>NOLUV
> <qso_date:8>20240818
> <qso_date_off:8>20240818
> <qth:7>Le Mars
> <rst_rcvd:2>59
> <rst_sent:2>59
> <state:2>IA
> <time_on:6>022159
> <tx_pwr:2>80
> <eor>
> 
> <band:3>20m
> <call:6>KA8HDE
> <cnty:5>Anoka
> <country:13>United States
> <freq:6>14.256
> <gridsquare:6>EN35hf
> <mode:3>SSB
> <my_gridsquare:6>EL29fr
> <name:16>Charles J Stroud
> <operator:5>NOLUV
> <qso_date:8>20240818
> <qso_date_off:8>20240818
> <qth:7>Andover
> <rst_rcvd:2>59
> <rst_sent:2>59
> <state:2>MN
> <time_on:6>023242
> <tx_pwr:2>80
> <eor>

[n9dk]

I just compared it by eye to a recent log I used for sota. Nothing immediately obvious except possibly is your call entered with a O instead of 0? Hard to tell of course.

What error did qrz give you?

[K1PCN]

Yes I agree. It is the callsign O instead of 0

[N0LUV]

Wow, this is embarassing. It appears I may have fat fingered my callsign. I will test with another entry and see what happens. Thank you for that.

Edited to add: The solution was not to edit my callsign, I had to delete the profile in HAMRS and then recreate my profile. It is working now.

Thank you again for finding my ID-10-T error. LOL